- #AUDI RADIO CODE SYMPHONY INSTALL#
- #AUDI RADIO CODE SYMPHONY MOD#
- #AUDI RADIO CODE SYMPHONY UPDATE#
- #AUDI RADIO CODE SYMPHONY CODE#
Simultaneously press the FM 2 and RDS buttons, holding them down, until “1000” lights up.The radio should now be working, but we can’t guarantee the commercials will be any better.
#AUDI RADIO CODE SYMPHONY CODE#
Once you have entered the correct code in the display press the P.SCAN and RBDS simultaneously again, holding down until SAFE is displayed.Press button one repeatedly until you arrive to the correct number (once would be one, twice would be two and so on.)
Use the station buttons 1 through 4 to input the radio code. (If you continue to hold the button down or press the buttons again this will make the radio think your radio code is 1000, so don’t do that) Simultaneously press the P.SCAN and RBDS buttons, holding them down, until “1000” lights up. I also checked all my connections from the back of the audio jack down to the 32 pin connector for continuity to make sure my soldering was good, all ok. Sorry, bit of a noob when it comes to electronics, I know my way around a bit but this has me stumped. I read somewhere that I might have to recode VAG under the Navigation coding, thoughts anyone ?Ĭould I have a fried pin 6 in the head unit which supplies right channel audio from the 32 pin connector?įaulty audio jack ? How could I test it ? Before adding the AUX in there was no connector on the head unit, just the socket with the pins. The 32 pin connector is a new addition to my setup, for this purpose only. If I use the fader to the right there’s no sound at all. When I connect a source to it (ipod) using a 3.5mm audio cable I get sound to front and rear but only on the left side. The head unit recognises AUX in and now displays it as a source option. Hooked up my 32 pin connector which has Left audio to pin 22, right audio to pin 6 and ground to pin 21 to a radio shack 3.5mm audio jack, RS part number 274-0249. Should I have used the AUX only option which is xxxxx5x ? Recoded VAG in the RADIO coding to show xxxx圆x for AUX and SAT radio. #AUDI RADIO CODE SYMPHONY MOD#
I just did the aux in mod on my 2006 A3 with RNS-E with Navigation, SAT, Phone and I have an issue with it. Choose it and your Audi RNS-E will start playing audio directly from your addition audio source. 0205155.įrom now on when you go to CD/TV → Source (or MEDIA → Source) you will see AUX option.
Change second to last digit by adding +4 to current value. #AUDI RADIO CODE SYMPHONY INSTALL#
Now you can connect the plug to the RNS-E and install the unit back in your cars dashboard. Use the wire repair kit and connect your wire with the appropriate pins: Next connect your audio wire to the 32-pin connector. If you car is not equipped with TV tuner this connector should be unused.
It should be located on the upper left side. There are 4 locks that need to be pressed with radio removal keys in order to eject the unit from the dashboard.Īfter that check back side of the RNS-E and locate 32-pin connector.
#AUDI RADIO CODE SYMPHONY UPDATE#
We recommend to update Audi RNS-E system to latest software version before starting this modification. 
Check this article: Audi navigation systems – MMI RNS BNS RMC differences.
This modification is designed only for cars with Audi RNS-E system. We are not responsible for any loss or damage. Performing this procedure may cause permanent damage to your car. VCDS, VAG-COM or other diagnostic interface. 32-pin A/V input connector (part no.: 1J0 972 977 G). audio cable (minijack, RCA or any other that you can connect to your audio source),. Your radio navigation system (also called Audi Navigation Plus) can play AUX-IN audio sources (stereo line-in), so you can connect your phone with your cars sound system. Audi RNS-E audio aux source activation is a quick procedure.
0 kommentar(er)
